PF Pressure Sensors

Zoom
High precision pressure sensor (without amp.)
Standard type(with glass base): Rated pressure 4.9kPa to 980.7kPa
Economy type(without glass base): Rated pressure 40.0kPa

Topics

Basic Information

High precision pressure sensor (without amp.)

PF Pressure Sensors image

RoHS compliant

Features

  1. A wide range of rated pressure, including a minute pressure

    There are 10 types of sensors covering a wide range of rated pressure from a minute pressure between 4.9kPa {0.05kgf/cm2}, to a maximum pressure of 980.7kPa {10kgf/cm2}.

  2. Highly accurate, linear characteristics

    This sensor employs a semiconductor strain gauge method, ensuring accurate and linear detection characteristics. It also has excellent repeatability of pressure characteristics.

  3. Impressive line-up of models

    • Taking their place alongside the standard 5kohm bridge resistance models are those with a 3.3kohm resistance which is optimally suited to 5V drive circuits.
    • Economy model (no glass base) gives outstanding value for consumer appliances 40kPa (0.4kgf/cm2) and 49kPa (0.5kgf/cm2) units are also available.

    Example of pressure characteristics (ADP1141)

    Drive current: 1.5 mA rated current; ambient temperature: 25°C 77°F

    Example of pressure characteristics (ADP1141)

Cross-section of Sensor Chip
Cross-section of Sensor Chip
Sensor Chip

Appllications

  1. Industrial use: pressure switches and pneumatic components, compressed air pressure measuring devices and airbeds
  2. Medical use: blood pressure meters, oxygen generator and airbeds
  3. Others: pressure sensing devices for air pressure mediums

↑Page top

Rating/Performance

Standard type (With glass base)

Type of pressure Gauge pressure
Pressure medium Air (For other medium, please consult us.)
Rated pressure Unit: kPa 490.3 833.6 980.7
Max. applied pressure Twice the rated pressure 1.5 times the rated pressure
Bridge resistance 5,000±1,000ohm
Ambient temperature -20 to +100°C -4 to +212°F(no freezing or condensation)
Storage temperature -40 to +120°C -40 to +248°F(no freezing or condensation)
Temperature compensation range 0 to 50°C 32 to 122°F
Drive current (constant current) 1.5 mA DC
Output span voltage 100±40 mV
Offset voltage ±20 mV
Linearity ±0.5%FS ±0.6%FS
Pressure hysteresis ±0.4%FS
Offset voltage-temperature characteristics
(0 to 50°C 32 to 122°F)
±5.0%FS
Sensitivity-temperature characteristics
(0 to 50°C 32 to 122°F
±2.5%FS
  1. Unless otherwise specified, measurements were taken with a drive current of1.5 mA ±0.01 mA at a temperature of 25°C 77°F and humidity ranging from 25% to 85%.
  2. Please consult us if a pressure medium other than air is to be used.
  3. This is the regulation which applies within the compensation temperature range.
  4. Please consult us if the intended use involves a negative pressure.

↑Page top

Dimensions

Unit: mm inch

  1. Terminal direction: DIP terminal Direction opposite the pressure inlet direction ADP11**(*)
  2. Terminal direction: DIP terminal Pressure inlet direction ADP12**(*)

1. Terminal direction: DIP terminal Direction opposite the pressure inlet direction ADP11**(*)

Dimensions

General tolerance: ±0.3 ±.012

Dimensions

Recommended PC board pattern
( BOTTOM VIEW )

Tolerance: ±0.1 ±.004

Recommended PC board pattern
Terminal connection diagram
Terminal connection diagram
Terminal No. Name
1 Output (-)
2 Power supply (+)
3 Output (+)
4 No connection
5 Power supply (-)
6 Output (-)

*Leave terminal 4 unconnected.

CAD Data List

↑Page top

2. Terminal direction: DIP terminal Pressure inlet direction ADP12**(*)

Dimensions

General tolerance: ±0.3 ±012

Dimensions

Recommended PC board pattern
( BOTTOM VIEW )

Tolerance: ±0.1 ±.004

Recommended PC board pattern
Terminal connection diagram
Terminal connection diagram
Terminal No. Name
1 Output (-)
2 Power supply (+)
3 Output (+)
4 No connection
5 Power supply (-)
6 Output (-)

*Leave terminal 4 unconnected.

CAD Data List

↑Page top